Sketch uses 228 488 bytes (21%) of program storage space. Maximum is 1 044 464 bytes.
Global variables use 32 261 bytes (39%) of dynamic memory, leaving 49 659 bytes for local variables. Maximum is 81 920 bytes.
C:\Users\dim\AppData\Roaming\Arduino15\packages\esp8266\tools\esptool\0.4.6/esptool.exe -vv -cd ck -cb 115200 -cp COM5 -ca 0x00000 -cf C:\Users\dim\AppData\Local\Temp\build717341743733632456.tmp/CheckFlashConfig.cpp.bin 
esptool v0.4.6 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>
	setting board to ck
	setting baudrate from 115200 to 115200
	setting port from COM1 to COM5
	setting address from 0x00000000 to 0x00000000
	espcomm_upload_file
	stat C:\Users\dim\AppData\Local\Temp\build717341743733632456.tmp/CheckFlashConfig.cpp.bin success
	setting serial port timeouts to 1000 ms
opening bootloader
resetting board
trying to connect
	flush start
	setting serial port timeouts to 1 ms
	setting serial port timeouts to 1000 ms
	flush complete
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	serialport_receive_C0: 72 instead of C0
trying to connect
	flush start
	setting serial port timeouts to 1 ms
	setting serial port timeouts to 1000 ms
	flush complete
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	read 0, requested 1
trying to connect
	flush start
	setting serial port timeouts to 1 ms
	setting serial port timeouts to 1000 ms
	flush complete
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_open
Uploading 232640 bytes from C:\Users\dim\AppData\Local\Temp\build717341743733632456.tmp/CheckFlashConfig.cpp.bin to flash at 0x00000000
	erasing flash
	size: 038cc0 address: 000000
	first_sector_index: 0
	total_sector_count: 57
	head_sector_count: 16
	adjusted_sector_count: 41
	adjusted_size: 029000
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	setting serial port timeouts to 10000 ms
	setting serial port timeouts to 1000 ms
	espcomm_send_command: receiving 2 bytes of data
	writing flash
....................................................................................................................................................................................................................................
starting app without reboot
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	espcomm_send_command: receiving 2 bytes of data
closing bootloader
	flush start
	setting serial port timeouts to 1 ms
	setting serial port timeouts to 1000 ms
	flush complete